How To Empty A Catheter Bag. If the short drainage tube is inserted into a pocket on the bag, take the drainage tube out of the pocket. Ensure your catheter tubing is not kinked (has any kind of bend in it), as this will block the flow of urine.
Once the bag is empty, shake the end of the valve inside the urinal to shake off any excess drips. Leg bags and valves should be. Make sure you have closed the valve before taking the urinal or jug away.
Leg bags should be emptied every 3 to 4 hours. Connect the tubing to the backup bag or drainage device. Before you empty the bag, you will need:
Once The Bag Is Empty, Shake The End Of The Valve Inside The Urinal To Shake Off Any Excess Drips.
If a leg bag isn't changed frequently enough, the bag can become overfull. You can't effectively rinse your bag if it's attached to your tubing. Leg bags and valves should be.
Cleaning Your Bag After Emptying It Download Article 1.
Drain any remaining urine from the bag you just disconnected. Ensure your catheter tubing is not kinked (has any kind of bend in it), as this will block the flow of urine. Pour some warm (not hot) soapy water into the bag.
Cover The Jug And Dispose Of Contents In The Sluice, Having Noted The Amount Of Urine If This Is Requested For Fluid Balance Records To Reduce Risk Of Environmental
You may also empty the Swish the soap around, being sure to get the corners of the bag. Empty the urine from your leg bag or bladder if using a catheter valve.
Not Too Loose Or The Bag Will Pull Down.
Make sure you have closed the valve before taking the urinal or jug away. Use a disposable wipe or towel to dry the end of the catheter. In short, it is important that catheter users are mindful of how full their drainage bags become.